The fence is made of hard aluminum which was cast from a mold. It features a sliding table to adjust for the width of cut and the drive mechanism was machined from steel. About 25 of these were made and the mold destroyed. Needless to say that access to a machine shop was essential to making one of these.
Since that time others have wanted to build similar machines, but lacked the resources to construct it. I have, however, duplicated it using parts available over- the-counter at any hardware and woodworking store. No machining is required and can be constructed in a couple of hours. The second photo shows this saw with the blade guard up for better view. It can cut strips of veneer from 1/8" to 3". Parquetry can also be cut if the strips are assembled together to form a whole. Overall it performs identical to the original saw.
The message in this post is that nothing is impossible if you only condition yourself to think outside the box. Ideas can become a reality if you persevere with imagination and foresight. In marquetry there is more than one way to complete a task and sometimes the alternative is more rewarding than the first.
